Initial Height Sensing (IHS) cycle requested manually.
>
If required, drive station to upper limit to execute initialization.
>
If required, drive station up to slow down switch.
>
Reset PP_AHC_MODE_62 (BITO_62)
>
Set PP_HIS_CYCLE_60 (BITO_60)

Toggle PP_CHAN_30_PH (BITO_65)
>
Probe Uptime
>
Receive AF 255 from ASIOB
>
Reset PP_HIS_CYCLE_60 (BITO_60)
Reset PP_CHAN_30_IH (BITO_64)
Reset PP_CHAN_30_PH (BITO_65)
>
Set PP_CHAN_30_IH (BITO_64)
>
100 millisecond delay
>
Set PP_PLASMA_AHC (BITO_63)
>
Preflow delay
>
Reset PP_PLASMA_AHC (BITO_63)
>
IHS cycle complete.



PROBE WITH VOLTAGE HEIGHT CONTROL

Automatic Height Control (AHC) requested.
>
If required, drive station to upper limit to execute initialization.
>
If required, drive station up to slow down switch.
>
Reset PP_AHC_MODE_62 (BITO_62)
>
Set PP_HIS_CYCLE_60 (BITO_60)
Toggle PP_CHAN_30_PH (BITO_65)
>
Probe Uptime
>
Receive AF 255 from ASIOB
>
Reset PP_HIS_CYCLE_60 (BITO_60)
Reset PP_CHAN_30_IH (BITO_64)
Reset PP_CHAN_30_PH (BITO_65)
>
Set PP_CHAN_30_IH (BITO_64)
>
100 millisecond delay
>
Set PP_PLASMA_AHC (BITO_63)
>
Preflow delay
>
Reset PP_CHAN_30_IH (BITO_64)
Reset PP_CHAN_30_PH (BITO_65)
Reset PP_CHAN_30_CH (BITO_66)
Reset PP_CHAN_30_AVH (BITO_67)
>
Receive Arc on signal from ASIOB
>
Set PP_CHAN_30_PH (BITO_65)
>
Reset PP_CHAN_30_PH (BITO_65)
Reset PP_CHAN_30_CH (BITO_66)
Reset PP_CHAN_30_AVH (BITO_67)
>
Pierce delay
>
Set PP_CHAN_30_CH (BITO_66)
Reset PP_CHAN_30_AVH (BITO_67)
>
If M57 not active prior to M65, Reset PP_PLASMA_AHC (BITO_63)
>
Reset PP_CHAN_30_AVH (BITO_67)
>
If M57 not active prior to M65, Set PP_AHC_MODE_62 (BITO_62)
If M57 not active prior to M65, Reset PP_CHAN_30_CH (BITO_66)
If M57 not active prior to M65, Set PP_CHAN_30_AVH (BITO_67)
>
AHC delay
>
If M57 not active prior to M65, Set PP_PLASMA_AHC (BITO_63)
>
Plasma Cutting
If M57 not active prior to M65, Toggle PP_PLASMA_AHC (BITO_63)
If M57 active prior to M65, Set PP_PLASMA_AHC (BITO_63)